Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Surly Bicycles

Surly Big Easy
$5,249.00
Riding with cargo is core to Surly's mission on this earth, whether you’re running a front rack and bag setup or a full-blown cargo bike and trailer. There are times, however, when even the strongest riders are limited in what they can haul, so Surly created Big Easy, their long-tail electric cargo bike. Consider it the 18-wheeler of the cargo bike world, minus the diesel fumes. When it comes to geometry, Big Easy rides and feels like a normal-length bike. It has increased stand-over height clearance and they threw in a dropper post to promote bike sharing across different-sized riders. So, whether you want to wave goodbye to the old family gas hog, upgrade your bike-supported business’s two-wheeled fleet, or simply haul more bowling balls during your daily commute, Big Easy makes doing all that, well, easy. - Full component set perfectly suited for electric cargo bikes, including four-piston Tektro brakes - Equipped with Bosch Performance CX, their most powerful drive unit - Capable of running dual batteries for extended range, if you’re into that. (All mounting hardware and wiring included.) - Damping headset provides smooth and stable handling characteristics under heavy loads - Condensed bike size range and dropper post routing to promote bike sharing and to accommodate more riders per frame size - Includes Bosch Standard 4A charger, wiring harness, and brackets for additional battery
Surly Big Easy
$5,000.00
The Big Easy is a longtail electric cargo bike that expands what's possible by bike. With passenger deck seating, Surly trailer integration and the option to run dual batteries, families with children, entrepreneurs with bike supported businesses and commuters who want to run more errands en route to their destination will appreciate the maximum cargo potential of Big Easy. - Condensed bike size range and dropper post routing to promote bike sharing and to accommodate more riders per frame size? - Fully tested and rated electric bike component set? - Capable of running dual batteries for extended range - Damping headset provides smooth and stable handling characteristics under heavy loads? - Equipped with the most powerful Bosch electric bike motor and largest battery available - Includes Bosch Standard 4A charger, wiring harness and brackets for additional battery
Surly Big Dummy
$2,249.00
Big Dummy is a long-tail cargo bike, which means that not only can you haul a serious amount of cargo, different accessories can be added to your Big Dummy frame and deck depending on what you want to carry. Being a dedicated single-piece frame, instead of an add-on to an existing bike, it's stiffer and resistant to torsional flex, which provides a better ride and longer lasting frame than long-tail add-ons. Like all Surly's frames, it's made of their size specific, 4130 CroMoly steel – a tube set engineered for cargo that sports lots of little touches that you've come to love in a Surly, like clearance for big tires and the use of common component sizes. Figure on being able to carry about 200 pounds (90kg) of cargo. The load weight, and how it's loaded, will affect the handling somewhat. Also, plan on using gears, especially as cargo weight increases. This may seem obvious, but as you get comfy with it, you will use your full range of gears as never before. The parts kit is good quality, and suitable to loaded as well as unloaded riding. It's got a 3x10 drivetrain, Avid BB7 disc brakes, quality Shimano Deore hubs, and 26x2.3" Kenda Kiniption tires. They've outfitted it with Surly-designed bags, deck, rails and Dummy Rail Collars; everything you need for the majority of stuff you might carry, like groceries, shovels, bags of charcoal or mulch, guitars, lamps, mannequins, whatever. Bags, deck, rails, and rail collars are all designed to improve on previous offerings and work together to make sure your stuff is transported with safety and stability. It's an unbending interface, which when you're carrying lots of cargo, is a good thing to have. Get creative, and get hauling. If you intend to carry a passenger on your Big Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. These are included with current Big Dummy bikes and frames, as well as available for older Big Dummy bikes and frames (compatible with all generations of Big Dummy bikes/frames). In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. If you are planning to carry a child on your Big Dummy, Surly recommends the use of a child seat. They've tested the Maxxi Yepp seat. Yepp makes an adaptor that allows their seat to mount onto Surly's deck. It works well with the Big Dummy. At this time other child seats are not recommended and will void your warranty. Surly is testing other options. For the most up to date compatibility/options, check http://www.surlybikes.com/safety Note: keep in mind Big Dummy weight limits when carrying a passenger.
Surly Bridge Club 700c
$1,155.00
Bridge Club is a highly versatile touring bike that perfectly hits the sweet spot spanning on- and off-road excursions. Bridge Club is for those multi-surface outings — planned or unplanned. We've all run out the clock on a dirt tour and had to add in some paved shortcuts. Conversely, when you’re feeling a little zesty on your next road tour, Bridge Club is ready for reroutes through the woods. Some people hear "bike touring" and immediately think of long-forgotten stretches of highway, small-town oddities, and roadside attractions. Some instantly recall desolate stretches of desert dirt roads or lush green forest trails. With Bridge Club, you can have your dessert and eat it too! - Ultra-focused on simplicity, it only has the barnacles that matter most to the discerning bike tourist - Two build kit options: Pavement (700c) and Off-Road (27.5-inch) - Run racks and panniers, framebags, or all of the above - Disc brake-specific, single position, vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm tires (with or without fenders), 27.5 x 2.80 tires (27.5 x 2.60 with fenders), and 26 x 3.0 tires (26 x 2.80 with fenders)
Surly Big Dummy Frameset
$1,099.00
Big Dummy is a long-tail cargo bike, which means that not only can you haul a serious amount of cargo, different accessories can be added to your Big Dummy frame and deck depending on what you want to carry. Being a dedicated single-piece frame, instead of an add-on to an existing bike, it's stiffer and resistant to torsional flex, which provides a better ride and longer lasting frame than long-tail add-ons. Like all Surly's frames, it's made of their size specific, 4130 CroMoly steel – a tube set engineered for cargo that sports lots of little touches that you've come to love in a Surly, like clearance for big tires and the use of common component sizes. Figure on being able to carry about 200 pounds (90kg) of cargo. The load weight, and how it's loaded, will affect the handling somewhat. Also, plan on using gears, especially as cargo weight increases. This may seem obvious, but as you get comfy with it, you will use your full range of gears as never before. It's suitable to loaded as well as unloaded riding. Bags, deck, rails, and rail collars are all designed to improve on previous offerings and work together to make sure your stuff is transported with safety and stability. It's an unbending interface, which when you're carrying lots of cargo, is a good thing to have. Get creative, and get hauling. If you intend to carry a passenger on your Big Dummy, Surly requires use of their Dummy Rail Collars. These provide a secondary retention system for the rack, as well as stiffen the rack system. These are included with MY17 Big Dummy bikes and frames, as well as available AM for older Big Dummy bikes and frames (compatible with all generations of Big Dummy bikes/frames). In addition, a stoker handlebar set up, found on tandem bicycles, is recommended as well. Make sure to check with seat post manufacturer for stoker handlebar compatibility. If you are planning to carry a child on your Big Dummy, Surly recommends the use of a child seat. They've tested the Maxxi Yepp seat. Yepp makes an adaptor that allows their seat to mount onto Surly's deck. It works well with the Big Dummy. At this time other child seats are not recommended and will void your warranty. Surly is testing other options. Note: keep in mind Big Dummy weight limits when carrying a passenger.
Surly Big Dummy Frameset
$1,050.00
Big Dummy is a long-tail cargo bike, which means that not only can you haul a serious amount of cargo, different accessories can be added to your Big Dummy frame and deck depending on what you want to carry. Being a dedicated single-piece frame, instead of an add-on to an existing bike, it’s stiffer and resistant to torsional flex, which provides a better ride and longer lasting frame than long-tail add-ons. Like all Surly's frames, it’s made of size specific, 4130 CroMoly steel – a tube set engineered for cargo that sports lots of little touches that you’ve come to love in a Surly, like clearance for big tires and the use of common component sizes. Figure on being able to carry about 200 pounds (90kg) of cargo. The load weight, and how it’s loaded, will affect the handling somewhat. Also, plan on using gears, especially as cargo weight increases. This may seem obvious, but as you get comfy with it, you will use your full range of gears as never before. The included Dummy Rail Collars provide a secondary retention system for the rack, as well as stiffen the rack system so you can safely carry a passenger.
Surly Bill Trailer (hitch sold separately)
$815.00
Surly's Bill Trailer is brilliantly engineered to carry almost everything! This seriously stout workhorse is built from chromoly with stainless-steel hardware for excellent durability and it rolls on quality 16-inch wheels and tires. There are even fenders. The trailer sits perfectly level as you ride, so even heavy and bulky items stay secure. You can tote up to 300 pounds of whatever on this bad boy! So go ahead, run all your errands by bike — you'll be smiling when you get back home. Please note that the required Surly hitch for this trailer is sold separately.
Surly Karate Monkey Frameset
$785.00
Karate Monkey is a highly-versatile trail bike that plays the part of 29er and 27.5+ equally well. Multipurpose Hardtail Mountain Bike Karate Monkey delivers a resilient, lively ride on all sorts of gnarly terrain. Its frame is a highly-versatile canvas for whatever dirty masterpiece your brain cooks up. According to our computing machine (Thor) it can be set up in approximately 487 different configurations. Originally designed as a 29er (and the frame that helped spark the 29" wheel movement), the latest Karate Monkey is designed to perform just as admirably as a 27.5+ rig as well. This allows you to pick your poison — provided your poison is having a really great time while permanently donning a maniacal grin, of course. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension-corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed, though) - Clearance for 29 x 2.5 or 27.5 x 3 tires
Surly Krampus Frameset
$785.00
Krampus is a dedicated 29+ trail bike that can go over, off of, or through just about anything in its path. Breaking the Mold with a 29er Bike As the first "plus" bike to hit the market, Krampus changed the way many people approach trail riding. It’s shown people the light of how high-volume, large-diameter tires can vastly improve the ride experience. It’s also done a bang-up job dispelling the myth that big tires make you slow. Krampus is kind of like the opposite of a mullet: long in the front and short in the rear. With a long toptube and compact chainstays, it takes trail-shredding abilities to the next level. A mullet may be business in the front, party in the back but Krampus makes partying its business. "Lean back, hang on, and ride that wild horse." -Thor - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed, though) - Clearance for 29 x 3" tires
Surly Disc Trucker 26-inch Frameset
$765.00
A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders
Surly Ted Trailer (hitch sold separately)
$710.00
Surly's Ted Trailer is brilliantly engineered to carry almost everything! This seriously stout workhorse is built from chromoly with stainless-steel hardware for excellent durability and it rolls on quality 16-inch wheels and tires. There are even fenders. The trailer sits perfectly level as you ride, so you can haul longer items that extend off the back. You can tote up to 300 pounds of whatever on this bad boy! So go ahead, run all your errands by bike — you'll be smiling when you get back home. Please note that the required Surly hitch for this trailer is sold separately.
Surly Cross Check Frameset
$549.00
Cross-Check is a tough-as-nails, super-versatile road bike that performs astonishingly well on any surface. There is no such thing as one bike that can do it all, but Cross-Check comes pretty damn close. It's a dyed-in-the-wool commuter and utility rig. It was a gravel crusher long before "gravel bikes" existed. Some people have even raced cyclocross on it. Though, we don't necessarily condone that behavior. Cross-Check was the first complete bike we ever offered. Since then, people have modified them hundreds of different ways to suit their riding styles and preferences. There’s a reason that nearly every person who has ever worked for Surly has owned one. - Semi-horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Gnot-Rite dropout spacing allows installation of 130 or 135mm hubs - Accommodations for front and rear racks and fenders - Clearance for 700 x 42mm tires with or without fenders
Surly Cross-Check Frameset
$549.00
There is no such thing as one bike that can do it all, but the Cross-Check comes mighty close. It's a cyclocross bike by design, but don’t be fooled into thinking that it has only one purpose. This jack-of-all-trades will do just as well getting you across the country as it does getting you across town. At home on the road, on trails, and on gravel, the Cross-Check'll fit pretty big tires, or smaller ones if you like. It can be built as a geared bike, a singlespeed, or a fixed-gear. The Cross-Check’s frame is engineered to supply a comfortable but lively ride. The tubing is CroMoly steel, high quality, custom-drawn, and built to our specifications. It's designed to work with components of popular sizes, meaning you can find both new and old parts to hang on this frame. It will accommodate a wide range of crank types and chainring sizes. It's got accommodations for racks and fenders (front and rear) and, because of its ample tire clearance, you can outfit it to suit where and how you will use it. There's a reason the Cross-Check has remained popular after all these years. The frame is comfy, tough as nails, and super versatile. Surly continues to hear from people for whom the Cross-Check has long been their go-to bike simply because it performs so astonishingly well on any surface.
Surly Long Haul Trucker Frameset (26-inch wheels)
$525.00
Travel to the ends of the earth on Surly's Long Haul Trucker! Surly's chromoly frameset offers a stable, smooth ride — even when carrying a load — and it's designed with pannier clearance so you can bring along all your gear! There are also cantilever-brake posts and braze-ons for mounting everything from bottle cages and fenders, to front and rear racks (standard or low-rider). Load your Long Haul up, hit the road, and see the world. - Fender eyelets, pump peg, downtube lever bosses, three sets of bottle cage bosses, rear housing stop for canti brakes - 4130 chromoly lugged and brazed fork; proprietary sloping crown with threaded eyelets in four locations: dual dropout, mid-blade, and a pair drilled right into the fork crown - Massive chainring clearance; use pretty much anything: 42/53t double, 38/52/56t triple - 100% Surly 4130 chromoly steel frame; main triangle double-butted - Clearance for a 26 x 2.1" tire with or without fenders - Frame is ED Coated for increased life expectancy
Surly Dummy Hitch
$325.00
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
Surly Trailer Hitch/Yolk Assembly (trailer sold separately)
$325.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Surly Straggle-Check Frame Bag
$195.00
Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.
Surly Mountain Frame Bag
$180.00
Surly mountain frame bags are designed specifically to fit in the main triangle of your Surly frame. Their mountain bags are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley or some trinket grandma gave you, you know it won't interfere with the mounting straps on the frame bag. Handmade by Revelate Designs in the U.S., these things are made of Dimension Polyant VX 42, a synthetic sailcloth. This stuff is durable, rip resistant, and tightly woven and laminated to make it highly water resistant (but not fully waterproof… Revelate advises using drybags inside if you risk riding in extended downpours or underwater). Compartment access is controlled by quality YKK brand water resistant zippers. The large main compartment has a flexible divider inside, and there's a hidden pocket too. There's also a compartment suitable for smaller items you''ll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are becoming more and more popular. They're light, reasonably voluminous, stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Surly offers them in ten sizes for many of their off-road frames. Buy the bag that matches the size of your frame based on the handy sizing chart. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. Those worried about keeping their frame looking pristine should immediately look for some other type of bag, or figure a way to protect their paint, such as duct tape. Or tatting a top tube doily. For example.
Surly Disc Trucker Thru-Axle Fork
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
Surly Krampus 110 Fork
$175.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Surly Midnight Special 650b Fork
$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Surly Midnight Special Road Fork
$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
Surly Wednesday Fork
$175.00
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs - Fits tires up to 5.25" wide - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
Surly Long Sleeve Men's Jerseys
$165.00
Once long ago, wool was the material of choice for cycling clothes and other active clothing. In the 80s, synthetics began to replace wool because they were new and shiny and stretchy and you could sublimate flashy, detailed graphics onto them which was a nifty thing for teams and shops. Even while synthetics enjoyed their era of dude-holding-the-bong popularity, however, wool did not die off. It still offered some really great features, like great moisture control and a resistance to putrescent reek. Our jerseys are an excellent example of wool done well. We've tried hard to produce something we hope will become your favorite piece of cycling clothing. Our long sleeve jerseys are made from medium-weight Merino wool. Merino fibers are soft and non-irritating even on sensitive skin. The fabric weight makes them suitable for cool weather to cold weather. They have a high collar to help keep the cold out and the warm in, and feature long body and long sleeves. The sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride. Like our short sleeve jerseys they feature a full length zipper and a reinforced rear pocket with zippered access on both sides.
Surly Long Sleeve Women's Jersey
$165.00
Once long ago, wool was the material of choice for cycling clothes and other active clothing. In the 80s, synthetics began to replace wool because they were new and shiny and stretchy and you could sublimate flashy, detailed graphics onto them which was a nifty thing for teams and shops. Even while synthetics enjoyed their era of dude-holding-the-bong popularity, however, wool did not die off. It still offered some really great features, like great moisture control and a resistance to putrescent reek. Our jerseys are an excellent example of wool done well. We've tried hard to produce something we hope will become your favorite piece of cycling clothing. Our long sleeve jerseys are made from medium-weight Merino wool. Merino fibers are soft and non-irritating even on sensitive skin. The fabric weight makes them suitable for cool weather to cold weather. They have a high collar to help keep the cold out and the warm in, and feature long body and long sleeves. The sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride. Like our short sleeve jerseys they feature a full length zipper and a reinforced rear pocket with zippered access on both sides.
Surly Rear Disc Rack
$160.00
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
Surly 24-Pack Rack
$155.00
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
Surly Rack (Rear)
$155.00
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Surly Long Haul Trucker Disc Fork (700c)
$135.00
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 700c has clearance for a 45mm tire
Surly Straggler Fork
$135.00
The Straggler fork is very much like the Cross-Check fork — it's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
Surly 8-Pack Rack
$130.00
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Surly Bridge Club Fork
$130.00
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
Surly ECR Fork
$130.00
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Surly Krampus Fork
$130.00
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut
Surly Moonlander Fork
$130.00
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
Surly Ogre 29/27.5+ Fork Non-Suspension Corrected
$130.00
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Surly Pack Rat 650B Fork
$130.00
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
Surly Steamroller Fork
$130.00
Our Steamroller Fork, designed around our fixed-gear frame, is brazed with a flat crown that is drilled to accept a standard-reach (47mm – 57mm) caliper brake. It has clearance for 700c x 38mm tires. There are no eyelets at the dropouts. Specifications: - Axle-to-crown: 375mm - Offset: 38mm - Steerer: 300mm, 1-1/8" straight - Tire Clearance: 700c x 38mm - Weight: 2.2lb (1.0kg) uncut
Surly Troll Fork Non-Suspension Corrected
$130.00
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
Surly Porteur House
$125.00
The Porteur House is made to fit Surly's 24 Pack Rack. It uses a system of eight Velcro straps to secure itself to the rack. The strap system is designed such that it will interface with many porteur-style racks with similar platform dimensions. The Porteur House bag is made from durable 1050 Nylon Canvas with polyurethane coating for protection from the elements. It uses a stiff insert in the bottom of the bag to give it shape and keep your stuff protected from wheel-spray. We also include three urethane coated, water-resistant nylon stuff sacks for an added layer of protection in each compartment; 2 front pockets and the large main compartment. The Porteur House bag has two accessory pockets on the front of the bag, each with a light loop to keep you visible and safe. Its main compartment is difficult to describe without using the word huge, and the roll-top closure keeps the rain out and your stuff in. The Porteur House also comes with a shoulder strap so you can take the bag off the bike and use it when you're at the Hallmark store shopping for your little figurines and keepsakes. If you're the kind of person who likes accessories that make your bike infinitely more useful, the Porteur House is for you. With dimensions sitting at 400x270x450mm, fully extended, this bag will be a monolithic figurehead of two-wheeled practicality perched on the front of your bike. The strap system keeps it planted to your rack, and it's more than large enough to bring home the bacon – literally – so go to the store and get some bacon.
Surly Ultra New Disc Rear Hub
$100.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!
Surly Edna 26-inch
$95.00
Meet Edna: Surly's latest ultra-versatile fat bike tire. Edna was designed to perform admirably on a wide variety of terrains. Wanna go ride some super loose dirt or snow trails? Do it. Feel like riding over the pulverized bones of your enemies or, as some people call it, sand? Go for it. Hardpack? Lean back and let ‘er rip. Edna’s unique tread pattern has enough lug to provide bite on the loose stuff and a tight center tread that doesn’t drag on the hard. Add in a 4.3” footprint and you have enough traction and float to ride wherever and whenever you damn well please. - Folding bead - Casing: 60 TPI - Max pressure: 30psi - Weight: 1330g
Surly Deck Bar
$90.00
The Surly Deck Bar is just what it sounds like, a convenient handlebar that attaches to the rear deck of the Big Easy, Big Dummy or Big Fat Dummy. Once attached, you will find that this is a very nice place for your passengers to grip and hold on tight while you cart them around town. I mean it’s that or the old uncomfortable around the waist hug move. You can decide what’s best for you and your passengers. Grips are also included with the bar, so you’ve got that going… - The Deck Bar attaches directly to the Dummy Deck to offer a secure hand grab for passengers - Provides a solid, comfortable handhold for riders large and small - Also available as part of the Corral Kit
Surly Knard 29-inch Tubeless Ready
$90.00
The Knard is a tire that just makes sense. With its tightly-spaced, low-block tread pattern, it provides the perfect ratio of traction and low rolling resistance. It grips well on all sorts of different surfaces and will haul some sausage on hardpack terrain or groomed trails. If you want a tire that has a little less bite and a bit more speed but don’t want to sacrifice traction, look no further. With sizes ranging from a svelte 41mm all the way up to a hefty 4.8”, there’s a Knard to solve all your fast-rolling needs. - Folding bead - Casing: 60 TPI - Max pressure: 35psi - Weight: 1170g
Surly Cheater Bar
$85.00
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
Surly Merino Pocket T-Shirt
$85.00
Surly Merino Pocket Tees are T-shirts made from wool that feature a chest pocket. They fulfill both your woolen and your pocketing needs in one handy garment. You can wear them all the hours of the day. They work equally well in the shower as they do in the pool. They function as both day-wear and evening wear. We've tripled its functionality by adding a pocket. A POCKET!!! Now we’ve taken that infinitely versatile garment (it’s the Cross Check of Clothes) and had it made for us out of (what some would call our third favorite material) Merino wool (after steel and rubber, silly). In short, it’s a T-shirt, it’s wool, it's got a pocket (A POCKET!!), you wear it. Donzo.
Surly Ultra New Disc Front Hub
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Wool Pocket T-Shirt
$85.00
Who doesn't like t-shirts? Idiots, that's who. What's not to like? You can wear them all the hours of the day. They work equally well in the shower as they do in the pool. They function as both daywear and eveningwear. Surly tripled its functionality by adding a pocket. A POCKET!!! Now they've taken that infinitely versatile garment (it's the Cross Check of Clothes) and had it made out of (what Surly would call our their favorite material) merino wool (after steel and rubber, silly). In short, it's a t-shirt, it's wool, it's got a pocket (A POCKET!!), you wear it. Donzo.
Surly Dirt Wizard 27.5-inch Tubeless Ready
$80.00
Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width. - Folding bead - Casing: 60 TPI - Max pressure: 30psi
Surly Terminal Handlebar
$80.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
Surly Dirt Wizard 29-inch Tubeless Ready
$75.00
Our family of Dirt Wizards is highly-focused – one might even say spellbound – on providing traction and control on the kinds of surfaces where nary traction nor control are to be found. Its tread is comprised of a dual row of aggressive, trail-gobbling, beveled knobs in the center and well-spaced, siped knobs to dig into loose corners. Designed to work on 50mm rims, Dirt Wizards are tall and wide, providing next-level traction and cushioning. The casings have been designed to be flexible and responsive, yet durable and supportive. Minimum rim size for these naughty little wizards is a 35mm outer rim width. - Folding bead
Surly Narrow Wide Chainring
$75.00
An issue many people ran into when they began using 1x setups was chain retention with the front chainring. In the beginning of the 1x movement, many companies dealt with this by using aftermarket chain keepers that somehow bolted to the frame. Many people discovered that using a narrow-wide chainring in conjunction with some type of 'clutch' rear derailleur helped abate or eliminate these chain-jumping issues. Narrow-wide rings use alternating tooth profiles that more positively engage the chain and help control a deflecting chain in bumpy conditions. Your friends at Surly have partnered with SRAM to bring you stainless steel X-Sync chainrings. Stainless Steel is durable. This durability is pretty useful when you're talking about the one ring that is bearing the brunt of all your miles.
Surly Ultra New Rear Hub (120mm)
$70.00 - $75.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
Surly Ultra New Rear Hub (135mm)
$75.00
Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.
Surly Ultra New Roadie Rear Hub (130mm)
$75.00
Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.
Surly O.D. Chainring
$70.00
The new chainrings are stainless steel and have improved ramps, gates, and pins for better shifting performance.
Surly O.D. Enduro Bottom Bracket
$70.00
Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard
Surly O.D. Enduro Press Fit Bottom Bracket
$70.00
Surly OD Bottom Brackets - PF cups are 41mm in diameter - Bearing I.D. is 24mm - OD bottom bracket comes with telescoping center sleeve for added durability - High quality double labyrinth sealed stainless Enduro bearings with corrosion resistant coating - 3 additional 1mm spacers are provided to help with chain line and crank arm clearance
Surly Stainless-Steel Chainring (130mm BCD)
$50.00 - $70.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
Surly Moloko Handlebar Bag
$65.00
The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm
Page 1 of 4 Next page