Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
Keep the flow going with Thomson's Elite Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and boasts Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
KS's Zeta post adds a sleek, seamless appearance to dropper function, making it a excellent choice for drop-bar and cross-country race bikes. The low drop allows for lower center of gravity for high speed descents and more nimble bike handling in technical situations without the bulk of a more trail-oriented dropper post. - Max. Height: 244mm - Min. Height: 136mm - Remote Position: Left or Right - Cable Routing: Internal
$299.95 - $369.95
When designing the WCS Kite dropper, Tom looked at what makes existing droppers fail and why their lifespan was so short. He knew service was a main contributing factor in dropper's lives, and wanted to create a post that could be easily serviced should something happen. In doing so, he created a system that is deceptively simple and incredibly reliable. The 3-position Kite offers 30mm of initial drop - the optimal height for lowered center of gravity while still providing an efficient pedal stroke - and full drop for when getting low and behind the rear end is necessary. - Three travel stops (0, 30mm, full drop) - Weight: sub 500 grams (including remote & housing) - 31.6 diameter - Stealth cable routing - Compatible with a variety of brake lever and bar mount configurations including Shimano I-SPEC I / II & SRAM Matchmaker - New two-bolt Trail post clamp offers easy adjustment and will not slip - Easily serviceable - Watch service video
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years
The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance. - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Factory Series models feature Genuine Kashima Coat - Remote lever sold separately Specifications: - Diameter: 30.9 - Travel (mm): 125 mm - Length: 411 mm - Max Height: 310 mm - Min Height: 200 mm - Offset (mm): 0 mm - Actuation: Cable Remote - Cable Routing: External - Color: Black - Defined Color: Black - Clamp Style: Std Rails
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. For quick and convenient routing or frames not drilled for internal dropper seatposts, the Koryak External is an ideal choice. - AL-7000 series - Infinite travel 150mm - External cable routing
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. The Koryak Internal dropper routes cables through the frame for a clean, snag-free assembly. - AL-7000 series aluminum - Infinite travel 150mm - Internal cable routing
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. For quick and convenient routing or frames not drilled for internal dropper seatposts, the Koryak External is an ideal choice. - AL-7000 series - Infinite travel 70mm - External cable routing
- Lightweight UD carbon construction - 1 bolt clamp system with wide angle adjustments - Matte carbon finishing - Compatible for Shimano DI2 battery integration - Weight from 199g - Available in 27.2mm, 30.9mm, 31.6mm - Length: 400mm
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained IFP hydraulic cartridge - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt quick-connect head - Remote sold separately
The Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your build. - Built by Fox using the same chassis and internals as the Fox Transfer post - Features faster rebound than Fox Transfer - Cable actuated with tool-free quick disconnect for easier installation and removal - Low lever force provides consistent actuation pressure even with saddle weighted or unweighted - Easy to modulate return speed with lever - Race Face 1x Lever or Universal Lever compatible - Matchmaker compatible - Remote sold separately
The TRS+ from e*thirteen is a fully mechanical dropper post focused on reliability, simplicity, and durability. This is a coil spring post with pre-set mechanical stops along it's travel range. No bleeding, no loss of air pressure or depleted nitrogen charge. And, your saddle position is rock solid, locked into place with a heat-treated cam instead of a hydraulic mechanism. The internally routed cable is controlled by a left, shifter-style lever that is best suited to 1x drivetrains. - 4 pre-set travel positions - Shifter-style remote is SRAM MatchMaker compatible, fully weather sealed, and uses a cartridge bearing at the lever pivot - Shop-serviceable with common tools: No oil or air pressure needed - Cable head is at the bottom of the post, clamped at the remote for easier removal during maintenance or shipping - Double bolt clamp: fits both standard and 7 x 9mm carbon rails - 5-Year warranty
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar - Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities. - Material: Carbon Fiber - Hardware Material: Titanium - Saddle Angle Adjustment: 0 – 27 degrees - Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails - Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm - Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar - Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)
Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability. - 3/2.5 titanium with a brushed finish - Length: 410mm - Proprietary head design allows independent saddle angle and fore/aft positioning - Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping - CNC-machined AL-7075 saddle clamps - Specially designed, stainless steel bolts provide ultimate strength and durability *NOTE: Not for use with carbon seat rails or ovalized seat rails
Ritchey's beautiful Superlogic Carbon Seatpost is made of high modulus monocoque carbon for ultra low weight and impressive vibration damping without sacrificing strength. Ritchey's single bolt clamp uses precision forged aluminum hardware, which cuts weight even further! And, the single bolt clamp makes installation and adjustment a breeze, too.
Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps
Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)
The ideal seatpost is simple, light, and easy to use, right? Fizik's Cyrano 00 goes one step further and gives you a perfectly balanced position regardless of clamp tilt thanks to the rotational center. That means you find the most comfortable, effective riding position to propel you to the finish line. The Cyrano is made from high modulus uni-directional carbon for exceptional strength and low weight, not to mention a tough and light aluminum clamp. It's topped off with titanium bolts for just a little more strength, weight, and class you expect from Fizik.
Stylus is a fresh new take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The top model Stylus–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - High-modulus carbon-fiber seatpost - Two-bolt parallel clamp - Weight: 195 grams
Seatposts can easily be mistaken for a simple alloy or carbon tube, but it’s an essential part of your equipment. The amount of flex in a seatpost determines the comfort of your ride. Pro Vibe seatposts have the right amount of stiffness to ensure maximum power transfer without losing comfort. Align all forces to work in favor of you—go for the PRO Vibe seatposts. - Strong UD carbon construction - Innovative 1 bolt clamping system - Compatible for Shimano Di2 battery integration - Weight: From 214g
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm
The smooth and sleek design of the patented SideBinder clamp makes the Ritchey WCS Carbon 1-Bolt a sophisticated choice to finish off a performance-oriented build. The beauty of this carbon masterpiece lies in the simplicity of the design of the wide clamp head. Secured with a single 5mm bolt, this post offers ease of adjustability while relieving stress on saddle rails. - Monocoque carbon construction - Available in 27.2 & 31.6mm diameters - Available in 350 and 400mm lengths - 7x7mm saddle rail clamp included - Interchangeable clamps available for all different carbon rail sizes - Saddle clamp torque spec: 12Nm - Matte UD carbon finish - 185g (27.2/350)
The Ritchey two-bolt post, reinvented. It's now lighter, more compliant, and more versatile than ever. Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter. LINK Carbon Posts use FlexLogic carbon layup developed for Pro Tour team bikes from Stevens, Canyon, and Scott and is 15% more vertically compliant with no loss of lateral or torsional stiffness. 15mm of offset and a reversible clamp allows for an additional 10mm of fore/aft saddle adjustment. - Monocoque Carbon Construction - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Matte UD finish - 181g (27.2x300)
The all-new Highline delivers infinite adjustment, smooth feel, and easy installation for any bike. Details - Shorter insertion length to fit more bikes - Premium Trelleborg sealing - Exclusive Igus LL-glide bearings and keys - Jagwire cable and housing - Self-contained hydraulic cartridge delivers industry-leading quality and reliability - Internal routing - Quick connect mechanism for ease of cable installation - Linear actuator for quick return speed - 2-bolt standard head - Remote sold separately
The K-Force post’s one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There’s also the option of mounting a Shimano Di2 battery in the bottom of the post. - One piece continuous carbon fiber construction - Forged alloy Minimal Top Clamp (MTC) - UD carbon finish - Removable mounting hardware for FSA WE or Di2 battery
$164.00 - $169.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
Page 1 of 4 Next page